Repair of pile auger oil leak


A pile auger is a pile driving machine used for foundation work at construction sites.
These machines are essential for creating foundations for large structures.
However, if the auger is damaged over time, the performance of the machine deteriorates.
As a result, operational efficiency can be reduced and the lifespan of the equipment can be shortened.
In the worst case scenario, it can cause safety problems, so regular inspection and repair are essential.

Below is a pile auger that was repaired due to an oil leak.

항타기 오거 케이스를 분리하기 위해 핀을 제거하는 모습

Remove the back plate bolt and remove the pin to separate the case of the lower auger of the pile driver.

 

항타기 오거 내부에 가득 쌓인 흙

If there is dirt or foreign matter accumulated inside,
You need to clean it first.

오거 오일이 새는 원인: 부러진 파이프

After cleaning, check for damaged parts.
Replace or repair parts depending on their condition.
When replacing parts, installation of new parts is required.
You need to make sure the parts are working properly.

I found the oil leak. The pipe is broken and there are traces of oil leaking down.

새 파이프로 교체

It was neatly replaced with a new pipe.

오거에서 모터를 분리하는 사진

99% of oil leaks have already been resolved by replacing pipes.

Additionally, check the inside once more

오거 기어박스 내부까지 체크하는 모습

Check twice or three times to see if there are any internal problems.

 

내열실리콘으로 오일이 새지 못하게 밀봉한 사진

It was completely sealed with heat-resistant silicone to prevent oil from leaking.

수리가 끝난 항타기 하부오거

Assemble the pile auger case. Check the connection status of the parts and check if there are any problems.

If there are no problems, the product is shipped to the site and the repair is completed.

 

Driving augers require regular inspection.
Check the condition of the auger through regular inspection,
You can make any necessary repairs in advance.
Of course, the inspection cycle may vary depending on the frequency of use of the machine,
Detecting problems early is key to reducing costs.

through regular maintenance
Reduce unnecessary repair costs and extend the life of the machine,
It can increase work efficiency.

Standard Heavy Industries always does its best for its customers.
Please contact us at any time for repair/manufacturing of pile drivers, haulers, or various attachments!

031-998-0614

contact@stndhi.com

stndhi.com

stndhi.co.kr

CATEGORIES:

Auger Repair
en_USEN